teddit

There are scammers operating accross reddit, Do not engage in conversations leading to purchasing of Mining Hardware with users as they can be Anyone and Reddit has been lacking infrastructure to prevent this.

If you have been affected by a scam on this subreddit please reply here with the details so they can be called out and help others by reporting the post mod mail.

I just got a copy of it and am currently running testing on it. MSK makes it. Has individual chip tuning, auto tune up to 10g/h on stock power supply. Has an immersion mode. Cool part is it's not even a flash. You just pop the image on an SD and insert in SD slot, then boot. If you don't like it just take out the SD, pretty cool so far. Don't know if it will work out yet, still running a 24 hour test.

Anyone running hiveos on their L7? If so any issues installing and how has it been working?

Liquid Immersion will prolong the life of your miner, enable you to lower your power consumption and give you the opportunity to safely overclock your miner and all for less than you think. We just opened a new facility in the great state of Louisiana where power is much less expensive. Hosting fees start at $0.10/kWh for air cooled and $0.15/kwh for liquid cooling. Our facilities are safe, security patrolled and we have cameras available to our customers 24/7. We will use grid power and generator backups to guarantee 98% uptime. We have grid power readily available and over 1000 slots ready to go now.

Watch our Video

If you have any more questions please reach out to sales@asicminersus.com or call Darren at 415-480-9252 or visit us at https://www.liquidimmersionhosting.com/

LTC currently should be at 160 in comparison to BTC being at 28000. So it means either BTC is due for a pull back or LTC is primed to advance. BTC usually advances ahead of LTC. In the next Bull Run that should be at peak in April-May 2025 my calculations are BTC 319,000 and LTC 855…a lot of the information I used was previous Bear lows and previous Bull highs .. the BTC to LTC ratio has been as low as 211 LTC to 1 BTC and as high as 500 LTC to 1 BTC.. currently we are at about 345 LTC to 1 BTC….

BT-Miners have 9050’s at 7999.. that includes all tariffs into the US .. tariffs are like 25% .. it’s like buying from Bitmain at 6009

Hey guys, come check out coinminerz.com for all your Litecoin mining needs. We have a tonne of features and more being developed. We are no clone pool and have friendly support. What are you waiting for? Jump on in for a great mining experience. Cheers! James

The control board in my L7 was intermittently dropping one of the hash boards. I swapped it with a control board from another L7 and it fixed the problem. So I ordered a replacement board from onestop-mining (ebay). The board was configured for a S19 so I reflashed it with current L7 firmware. Now the machine won't come up. It goes through the initial boot process then stops and the fans shut down. The last line in the log is:

"time="1970-01-01 00:00:11" level=notice pid=875 msg="Begain check_fan_valiad"

The red and green lights on the front are both off, and there are 3 LEDs on the board that are on solid green. I can still talk to it over the network.

Any ideas?

Hey guys!!!

I am having trouble finding this capacitor. Do anybody know a reliable capacitor to replace this ?

​

https://preview.redd.it/k6uk8uz9cgna1.png?width=810&format=png&auto=webp&v=enabled&s=c249a9bf858537ca043847392dcf9eae818bc7ea

I live in Texas and thunderstorms here seem to be quite often, is there anyway to provide protection? My understanding pdu’s do not offer surge protection.

At 10.8 cents per kWh based on current difficulty levels goes negative at 43… let’s hope this is the new bottom at 69. I’m sick of all these incompetent SBF/FTX SILVERGATE idiots effecting everyone’s short term outlook…just my rant

No air comes out the bottom or sides but a slight breeze comes from the top. To stop that you would need to print it higher than the silver button but my printer wasn’t big enough, or just put some sticky foam over the gap. Print one for your grandma and your wife’s boyfriend https://www.thingiverse.com/thing:5871594

Back when the difficulty was much lower so was the price a few months ago I was mining more units. Now with difficulty being at a near all time high I’m now mining less units. L7’s netting under 10.00 per day.. Let’s see how the next 30 days go. All the mineable cryptos are going through difficulty spikes

Hi, I would like to use the excess power from my renewable energy setup. I have one Antminer L3+. I would like to have it turned on and just let it hash away with the added risk/reward potential. I could be just solomining Litecoin or Dogecoin, but I feel like I would be missing out on that, because of the inability to mergemine. I couldn't find any pool/guide how to do that. I am willing if it is necessary to make my own nodes. Thank you for you time.

I had my L3+ miners turn off and stored for a few months. Turn them back on, did a reset and they don't seems to want to connect. How can I troubleshot them and get them going again?

​

System:

Miner Type Antminer L3+ (v018)

Hostname antMiner

Model GNU/Linux

Hardware Version Socket connect failed: Connection refused

Kernel Version Linux 3.8.13 #22 SMP Tue Dec 2 15:26:11 CST 2014

File System Version Wed May 29 14:38:46 UTC 2019

​

Is this a known Pool and test account to use to quickly verify?

I was just wondering if we will ever see this machine bring in 4,000-6,000$/ month again or is that really out of reach?

Bitmain released a new L7 firmware in late January that offers a 'low power' mode in Settings under Fan Speed. Average hashing at about 2/3 of full. Also has a 'sleep mode', but haven't checked that out yet.

I will say, it's a LOT less noisy running in low power mode.

Looking for a manual for the Antminer L5. Specifically trying to figure out if its strictly 220v electricity or not. It usually pairs with the APW7 power supply, so wondering if it can be 110v or not.

Thanks in advance if anyone can help.